Do you have any questions? Customer Care: 0800 21 872337

SunSun CPF-280 Pressure Pond Filter UVC 11W up to 8000L

Brand : Sunsun

Code : CPF-280

$NZ329.00 $NZ269.00

 

refer to a Friend | Print this page

Product Video

Product Description

• SunSun Pressure Pond Filter for ponds up to 8000l
• Integrated UVC lamp 11W
• Biological and mechanical cleaning
• maximum pump capacity 9000l/h

• Contamination indicator
• Large water flow through
• Optimal development of pond filter biology
• Easy and uncomplicated bio-pressure pond filter system
• This system provides quickly and reliably for clear water 
• Various filter materials (special filter sponges)

Advantages:
Mechanically and biologically operating pressure pond filter SunSun CPF-280 with integrated 1W UVC pond clarifier. Technical equipment as well as connections are in the top cover. The pond filter can be dug without any problems. The pond water can be pumped to higher-lying waterfalls and returned into the garden pond again.

Purification and maintenance:
The yearly maintenance is limited to the control of the filter media and the UVC-lamp. The UVC-lamp should be changed after every 6000-8000 operating hours. Said change is supposed to be most optimal with the start of the pond season in spring. 
The cleaning of the filter sponges is possible by the means of manual backwash. You simply exchange the inlet and outlet. The water required for the backwash could be used to water the garden.

Location of the pressure pond filter:
The pressure pond filter is located at the edge of the pond and connected to the water by a suitable pond pump (not included in the supply, kindly note the maximum volume capacity of the pond pump). The water is passed through the pond filter past the integrated UV-pond clarifier and led back into the pond, now being purified.

Operation:
By the way of mechanical filtration, floating particales and dirt remain in the filter and do not return into the pond water.
Pond filter combine the mechanical and biological purification. Microorganisms accumulate inside the filter materials and remove germs and bacteria from the water. Floating particles and dirt are removed.

It takes about 4-6 weeks for the filter bacteria to settle sufficiently inside the pond filter. Only then it is reasonable to make use of a UVC-pond clarifier. The so-called initial starter bacteria help to reduce the time for a new pond filter. The "starter bacteria" are known as special microorganisms that are grown in laboratories. Being ctive at a temperature of approx. 10°-12°, the pond filter´s temperature should not exceed 40°C. It is therefore advisable to place the pond filter in a shady place. It should not be exposed to direct sunlight. 

UVC-pond clarifier significally support the effectiveness of the pond filter. Being in a flow reactor, pond clarifier radiate the pond water with UV-C radiation. Due to their UV-radiation, UVC ond clarifier change the tertiary and quaternary structure of algae proteins. This means the destruction of algae. The algae clump together, thus forming large particles that can be easily removed from the water cycle by the mechanical pond filtration inside the pond filter.

 

Material polypropylene
Input voltage 230V ~ 50Hz 
UVC-power 11 Watt
Power  11 W
Hose connection Ø / Inch 19 mm / 25 mm / 32 mm / 38 mm
cable length 4.5 m
Volume / Capacity 20 l
Pond size with fish 4.000l
Pond size without fish 8.000l
Recocmmended flow rate 9.000 l/h

Write Question and Answer

We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept All”, you consent to the use of ALL the cookies. Terms & Conditions Accept All